Connecting A Vacuum Cleaner - BWT Soliflow Notice D'installation Et Conseils D'utilisation

13. CONNECTING A VACCUM CLEANER
• Remove the rear lid from Soliflow
• Switch filtration on.
• Hold the end of the vacuum hose in front of a return fitting until all the air is purged.
• Keeping the hose under water, insert it through the Soliflow suction mouth.
• Insert the hose into the skim-vac and place it in the prefilter basket. Suction
holds it in position.
• Pass the cleaner slowly over the bottom of the pool.
Once the pool is clean, stop the filtration to facilitate removal of the skim-vac.
Be careful not to damage the skimmer weir when withdrawing the hose.
32/40
2020/02 - Indice de révision : H - Code : 26901 FILTRATION BWT myPOOL