Fitting The Lids; Skimmer Flange And Weir - BWT Soliflow Notice D'installation Et Conseils D'utilisation

11.

FITTING THE LIDS

Place the front lid in position
and lock it.
12.

SKIMMER FLANGE AND WEIR

CAUTION !
The flange absolutely must be mounted, even in the case of tiled concrete pools. The flange supports
both the trim and the skimmer weir.
Mount the 2 adhesive seals
(the first before the
waterproofing is laid,
the second on top of
the waterproofing).
BWT myPOOL
FILTRATION
Mount the flange on top of the
waterproofing.
2021/01 - Indice de révision : I - Code : 26901
Place the rear section of the lid
in position.
Put the trim with skimmer weir
in position.
Clip together.
31/40