Underwater Light Option - BWT Soliflow Notice D'installation Et Conseils D'utilisation

9.

UNDERWATER LIGHT OPTION

1
2
Using the insulating screw Pour the packet of resin into the Place the transformer in its
joints provided, connect the junction box and replace the lid. niche on the plate.
transformer. The 230 volt
input should be connected to
the thinner wire (1) and the
underwater light to the thicker
wire (2).
10. INSTALLATION OF THE CYCLONE
cyclone
multiflow bag
flow-lock
Fit the cyclone into the filter bag. Fasten with the flow-lock.
Make sure that the plastic tab on the flow-lock clips into the depression on the cyclone.
Position the basket in the base Check that the basket is Lower the cyclone and filter bag
of the Soliflow unit. correctly centred. into Soliflow.
30/40
2020/02 - Indice de révision : H - Code : 26901 FILTRATION BWT myPOOL