10 Replacing the rechargeable battery
(AC/DC version only)
WARNINGS
Before replacing the rechargeable battery, switch off the Clario and pull the mains plug
from Clario out of the fixed mains socket�
Before this operation, pull the mains plug out of the fixed mains socket.
1�
2�
3� Remove the old rechargeable battery�
4� Insert the new rechargeable battery�
5�
6� Close the lid of the battery compartment� Make sure that
the lid is closed well and that the battery cable is not
clamped or pinched�
7�
Calibrate and test the rechargeable battery (see chapters
11 / 12)�
1�1 Open the lid of the battery
compartment on the bot-
tom of the Clario�
2�1 Detach the battery cable
by pulling the plug�
5�1 Reattach the battery cable
by plugging in the plug�
Replacing the rechargeable battery
| 21