Replacing the rechargeable battery
(AC/DC version only)
WARNINGS
Before replacing the rechargeable battery, switch off
the Clario and pull the mains plug from Clario out of
the fixed mains socket�
1�
2�
3� Remove the old rechargeable battery�
4� Insert the new rechargeable battery�
5�
6� Close the lid of the battery compartment� Make sure
that the lid is closed well and that the battery cable is
not clamped or pinched�
7�
Calibrate and test the rechargeable battery (see
chapters Battery data and test/Battery calibration)�
Open the lid of the battery
compartment on the bottom of the
Clario�
Detach the battery cable by
pulling the plug�
Reattach the battery cable by
plugging in the plug�
21