Electromagnetic Emissions - Medela Clario Mode D'emploi

Electromagnetic Compatibility (EMC, IEC 60601-1-2:2007, Table 1)

Electromagnetic Emissions

Clario is intended for use in the electromagnetic environment specified below� The cus-
tomer or the user of Clario should assure that they are used in such environment�
Emission Tests
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctutions /
flicker emissions
IEC 60000-3-3
WARNINGS
Clario should not be used adjacent to or stacked with other equipment� If adjacent or
stacked use is necessary, Clario should be observed to verify normal operation in the
configuration in which it will be used�
322 |
Technical documentation
Compliance Electromagnetic environment – guidance
Group 1 Clario uses RF energy only for its internal func-
tion� Therefore, its RF emissions are very low
and are not likely to cause any interference with
nearby electronic equipment�
Class B Clario is suitable for use in all establishments,
including domestic establishments and those
directly connected to the public low-voltage
Class A
power supply network that supplies buildings
used for domestic purposes�
Complies