Technical Data; Installation; Assembly; 57 X 51 Mm And 58 X 56 Mm Head Rail - SOMFY J4WT Notice D'installation

1.3

Technical data

Cutaway diagram of the head rail, closed at the bottom
20 mm
The mushroom (9 015 911) works in up and down
direction.
2

Installation

2.1

Assembly

2.1.1 57 x 51 mm and 58 x 56 mm head rail, open below
• Fit the 2 adaptors (1) using 2 M 3 x 8 �olts (2) on the
motor shaft.
 Tightening torque = 1.2 Nm
• Connect the connection ca�le (3) to the motor.
• Mushroom should �e positionned plug side
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the rail (4)
a�ove the pads (6).
• The shaft can �e fitted into the adapter using a
headless screw (7).
If the tension of the clips (5) is insufficient, it is possible to stick up to 3 pads (6) one on top
of the other.
© 2009 Somfy SAS. All rights reserved. 12/2009
End limit switch capacity:
Direction of rotation:
Mushroom on
plug side
56 mm
Length
2 1

7
7
4
200 rotations
DOWN
Mushroom opposite
plug side
56 mm
6 Nm 10 Nm 18 Nm
306 mm 321 mm 341 mm
5
5
6
6
UP
2
1
7
3
7
4
21