78 X 67 Mm Head Rail, Open Below - SOMFY J4WT Notice D'installation

2.1.3

78 x 67 mm head rail, open below

• Fit the 2 adaptors (1) using 2 M 3 x 8 �olts (2) on the
motor shaft.
 Tightening torque = 1.2 Nm
• Connect the connection ca�le (3) to the motor.
• Fit the two clips (4) to the motor.
• Mushroom (8) should �e positioned opposite to the
plug.
• Insert the motor into the head rail (5).
• Using the clip (6), attach the motor into the rail (5).
• The shaft can �e fitted into the adapter using a
headless screw (7).
For motors with more than 10 Nm
• Additional clamp has to �e fixed with a new screw
�> tightening torque ≤ 4 Nm.
© 2009 Somfy SAS. All rights reserved. 12/2009
2
1
7
6
4
5
7
3
1
7
8
4
6
4 6
7
2
23