Factory Mode And Trouble Shooting; Factory Mode; Trouble Shooting - SOMFY J4WT Notice D'installation

4

Factory mode and trouble shooting

4.1

Factory mode

Back to factory mode
• Connect the setting ca�le.
• Push �oth �uttons (Up & Down) at the same time for 15 seconds (if dou�le push �utton used) or press on
WT �utton of setting ca�le for 15 seconds.
• Motor turns �riefly two times.
• The current position of the venetian �lind is stored as lower end limit.
• The upper end limit is 120 motor rotations a�ove the lower end limit.
4.2

Trouble shooting

Motor does not turn
Check:
• The wiring of the motor.
• If the motor is overheated (wait for cool down of the motor).
• If the appropriate ca�les are used.
© 2009 Somfy SAS. All rights reserved. 12/2009
27