Storage; Shipment; Troubleshooting; Warning - MSA Sirius Mode D'emploi

Masquer les pouces Voir aussi pour Sirius:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Storage

When not in use, store your Sirius Multigas Detector in a safe, dry place
between 0° and 40°C (32° and 104°F).
After storage, always recheck instrument calibration before
use. During storage, sensors may drift or become inopera-
tive and may not provide warnings of dangers to the health
and lives of users.

Shipment

Pack the Sirius Multigas Detector in its original shipping container with
suitable padding. If the original container is unavailable, an equivalent
container may be substituted. Seal instrument in a plastic bag to protect
it from moisture. Use sufficient padding to protect it from the rigors of
handling. Damage due to improper packaging or damage in shipment is
not covered by the instrument's warranty.

Troubleshooting

The Sirius Multigas Detector will operate reliably for years when cared
for and maintained properly. If the instrument becomes inoperative,
follow the Troubleshooting Guidelines in TABLE 6-1; these represent the
most likely causes of a problem. You may return inoperative instruments
to MSA for repair.
MSA Instrument Division
Repair and Service Department
1000 Cranberry Woods Drive
Cranberry Township, PA 16066-5207
Do not use the pump, sample line, or probe unless the pump
alarm activates when the flow is blocked. Lack of an alarm is
an indication that a sample may not be drawn to the sensors,
which could cause inaccurate readings. Failure to follow the
above can result in serious personal injury or death
To contact MSA International, please call:
1-412-967-3000 or 1-800-MSA-7777
6-12

" WARNING

"
" WARNING
"

Publicité

Table des Matières
loading

Table des Matières