Time And Date Display (Figure 3-14); Pid Setup; Displaying Current Response Factor; Warning - MSA Sirius Mode D'emploi

Time and Date Display (FIGURE 3-14)

• The time appears on the display to show the current time of day in
a 24-hour format.
• The date appears on the display with the current date displayed in
the following format:
• MM:DD:YY

PID Setup

It is very important to have an understanding of PID basics
when changing your PID settings. Failure to properly identi-
fy the VOC gas being measured, and failure to select the cor-
rect Response Factor alarm values (exposure, STEL, TWA)
that match your desired Response Factor, and/or the correct
bulb, will result in erroneous readings that could lead to
serious injury or death.

Displaying Current Response Factor

To display and/or change your current VOC response factor, press
PAGE/ until you see the Response Factor Page (FIGURE 3-15). This
shows the eight-character identifier and multiplier for the current gas of
interest. A complete list and reference table for the eight-character
identifiers of all available gases is shown in TABLE 7-10.
Figure 3-14 Time Display

" WARNING

"
3-21