4. Use the RESET/
numbers, and use the ON-OFF/ACCEPT button to select the letter
and move on to the next letter.
Changing PID Bulb Selection
Several PID bulb options are available for this instrument. The two bulb
options currently available are:
•
10.6 eV
•
9.8 eV
Changing to a different type bulb involves two steps:
•
physically installing the bulb (see Chapter 6, Removing and
Cleaning the PID Bulb for instructions on physically removing
and installing the bulb)
•
then updating the software to use the correct parameters for
the new bulb.
To update the software:
1. Go to the Response Factor page; press the RESET/
2. Scroll to and select -BULB- (FIGURE 3-14)
Figure 3-14. Changing PID Bulb Selection
button to scroll through the alphabet or
button.
3-23