Compressed Air Hook-Up; Safety Regulations - Corghi EM 7240 Manuel D'utilisation

COMPRESSED AIR HOOK-UP

CAUTION
The compressed air hook-up may only be performed if the pneumatic ring nut is sup-
plied (optional accessory supplied on request).
WARNING
All compressed air hook-ups must be carried out by qualified personnel only.
- The connection to the workshop compressed air system must ensure a minimum pres-
sure of 8 bar.
- The union for connecting to the compressed air system is of a universal type and there-
fore no special or additional couplings are required. A pressure-resistant hose with 6mm
inner diameter and 14mm outer diameter must be fixed to the notched union using the
hose clamp provided with the machine.

SAFETY REGULATIONS

WARNING
Non-compliance with the instructions and danger warnings can cause serious injuries
to the operator or other persons.
Do not operate the machine until you have read and understood all the danger/warn-
ing notices in this manual.
The correct use of this machine requires a qualified and authorised operator. This operator
must be able to understand the manufacturer's written instructions, be suitably trained
and be familiar with the safety procedures and regulations. Operators are forbidden
from using the machine under the influence of alcohol or drugs that could affect his/her
physical and mental capacity.
The following conditions are essential under any circumstances:
- Read and understand the information and instructions described in this manual.
- Have a thorough knowledge of the features and characteristics of the machine.
- Keep unauthorised persons well clear of the working area.
- Make sure that the machine has been installed in compliance with all relevant standards
and regulations in force.
- Make sure that all machine operators are suitably trained, that they are capable of using
the machine correctly and safely and that they are adequately supervised during work.
- Do not touch power lines or the inside of electric motors or any other electrical equip-
ment before making sure that they have been powered off.
- Read this booklet carefully and learn how to use the machine correctly and safely.
- Always keep this user manual in a place where it can be readily consulted and do not
fail to refer to it.
EM 7240 Operator's manual
UK
65