Stihl MH 700 Manuel D'installation page 72

● 1 Press release lever (1) to the stop
and hold.
● 2 Press lateral adjustment lever (2)
quickly to the stop and hold.
● Release release lever (1). The
handlebar can now be adjusted to the
desired position.
● 3 Securing the handlebar:
Release lateral adjustment lever (2),
making sure that the handlebar
engages.
8.7 Headlamp
The headlamp in the engine cover can be
used to illuminate the work area.
70
The headlamp can be activated via the
light switch on the upper handlebar.
Switching the headlamp on/off:
● 1 Press On switch (1). The headlamp
is switched on.
● 2 Press Off switch (2). The headlamp
is switched off.
9. PTO drive
9.1 PTO drive
The tiller is additionally equipped with a
PTO drive.
Risk of injury!
The PTO cover must be installed
for working with the tiller.
Hair, clothing or parts of clothing
could become caught or entangled
in the rotating parts. This can result
in serious injury.
Always observe the enclosed
instruction manual when using
attachments.
Removing the PTO cover:
The PTO cover must be removed before
the PTO drive can be used.
● Unscrew screws (1) and remove
cover (2).
0478 404 9603 A - EN