Stihl MH 700 Manuel D'installation page 48

Stopping the engine
Engaging and disengaging self-
propulsion
Engaging and disengaging reverse
drive
Tilling
Maintenance
Removing the hoes
Cleaning the machine
Engine
Gearbox
Cable maintenance
Service intervals
Storage and periods of inoperation
Transport
Transporting the tiller
Environmental protection
Disposal
Minimising wear and preventing
damage
Standard spare parts
EU - Declaration of conformity
Petrol tiller (STIHL MH)
Technical specifications
REACH
Troubleshooting
Service schedule
Handover confirmation
Service confirmation
2. Notes on the instruction
manual
2.1 General
This instruction manual constitutes
original manufacturer's instructions in
the sense of EC Directive 2006/42/EC.
46
STIHL is continually striving to further
75
develop its range of products; we therefore
reserve the right to make alterations to the
75
form, technical specifications and
equipment level of our standard
75
equipment.
75 For this reason, the information and
illustrations in this manual are subject to
76
alterations.
76
This instruction manual may describe
77
models that are not available in all
77
countries.
77
This instruction manual is protected by
78
copyright. All rights reserved, especially
78
the right of reproduction, translation and
79
processing using electronic systems.
79
79
2.2 Instructions for reading the
80
instruction manual
80
Illustrations and texts describe specific
operating steps.
80
81
All symbols which are affixed to the
machine are explained in this instruction
81
manual.
81
Viewing direction:
82
82
Viewing direction when "left" and "right"
are used in the instruction manual:
82
the user is standing behind the machine
84
and is looking forwards in the direction of
84
travel.
84
Section reference:
References to relevant sections and
subsections for further descriptions are
made using arrows. The following example
shows a reference to a section: (
Designation of text passages:
The instructions described can be
identified as in the following examples.
Operating steps which require intervention
on the part of the user:
● Release bolt (1) using a screwdriver,
operate lever (2)...
General lists:
– Use of the product for sporting or
competitive events
Texts with added significance:
Text passages with added significance are
identified using the symbols described
below in order to especially emphasise
them in the instruction manual:
Danger
Risk of accident and severe injury
to persons. A certain type of
behaviour is necessary or must be
avoided.
Warning
Risk of injury to persons. A certain
type of behaviour prevents possible
or probable injuries.
Caution
Minor injuries or material damage
can be prevented by a certain type
of behaviour.
Note
Information for better use of the
machine and in order to avoid
possible operating errors.
Texts relating to illustrations:
Some Illustrations which are necessary for
use of the machine can be found at the
front of this instruction manual.
4.)
The camera symbol serves to link
the figures on the illustration pages
with the corresponding text
passages in the instruction manual.
1
0478 404 9603 A - EN