DT SWISS R 232 ONE Manuel D'utilisation page 14

3.2 MOUNTING SHOCKS WITH SPHERICAL BEARINGS
The spherical bearings shown are already fitted to these shocks. The mounting hardware (pin, sleeves,
O-rings) suitable for your bike frame is available separately.
Consult the manufacturer of your bicycle frame for the correct
dimensions of the hardware. For instructions on installing the
mounting hardware, refer to the Technical Manual for this
shock at www.dtswiss.com.
For this type, there are restrictions with regard to
the mounting position:
→ Ensure both shock eyelets are mounted
vertically and are oriented in the same
plane.
→ Do not use any shock mount that is vertical
and sits directly on the shock.
→ Ensure that the shock mount on the bicycle
frame allows the spherical bearings (1) to
move freely.
14
1
1 ball 2 plastic ring
1
3
2
3 shock eye