Leica BIOSYSTEMS Kreatech FISH probes FGFR1 (8p11) – XL Mode D'emploi page 12

Kreatech FISH probes
Reagent
Probe 1 (10x) -
Red
Probe 2 (10x) -
Green
BOND
Hybridization
solution
(AR9037)
Total volume
at 1x final
concentration
Number of tests
Contact your local distributor or the customer care of regional office
of Leica Biosystems to report any unusual staining.
Product Specific Limitations
Users who deviate from recommended test procedures must accept
responsibility for interpretation of patient results under these cir-
cumstances. Protocol times may vary due to variation in tissue type,
fixation and processing. In addition, BOND Enzyme concentration
and incubation time may require optimization depending on tissue
type, processing and fixation conditions.
Further Information
Further information on in situ hybridization with BOND reagents can
be found in your BOND user documentation.
Warnings and Precautions
• This product is intended for in vitro diagnostic use only
• For laboratory / professional-use only
Volume used
(recommended)
1.0 ml
1.0 ml
8.0 ml
10 ml
up to 40 tests
Example: Reduce Green signal
strength
Red at 1x:
Green at 0.5x:
13
1.0 ml
0.5 ml
8.5 ml
10 ml
up to 40 tests