Automatic Ttl Fill-In Flash Mode - Metz Mecablitz 52 AF-1 Mode D'emploi

Setting the mode of operation
• Switch on the flash unit with the
button. The start screen appears.
Thereafter, the flash unit always switches
52AF-1
on with the mode of operation that was
OLY
used last (e.g. M flash mode).
M
7,9 m • Press the displayed mode of operation on
the touch display as many times as it takes
m
Z
F4.0
35
OOM
m
for the display for selecting the mode of
INFO 1/1
operation to appear.
• Press the
TTL
touch display and select the desired mode
TTL FP of operation.
• Press on the selected mode of operation
that is highlighted in black. The setting is
adopted immediately.
TTL
• Set a suitable mode of operation on the
-7,9 m
0,7
camera, e.g. P, Tv, Av, M etc.
m
Z
F4.0 • Tap the shutter release to transfer data
35
OOM
m
between the flash unit and the camera.
EV
INFO
sensor buttons on the

7.2 Automatic TTL Fill-in flash mode

The automatic TTL fill-in flash mode is
activated by most cameras when the
automatic programme P is selected and by
Vari or subject programmes during daylight
(see camera operating manual).
Fill-in flash mode overcomes troublesome
shadows and produces a more balanced
exposure between subject and background
with contre-jour shots. The camera's
computer-controlled metering system sets
the most suitable combination of shutter
speed, aperture and flash output.
+
Ensure that the contre-jour light source does
not shine directly into the lens, as this will
interfere with the camera's TTL metering
system!
There is no setting or display for automatic
TTL fill-in flash in the flash unit.
k
143