Remote Master Mode Settings; Setting The Flash Mode On The Master Flash Unit - Metz mecablitz 64 AF-1 digital Mode D'emploi

10.1 Remote master mode settings

The slave group A is activated at the factory.
The master flash unit and slave groups A, B
and C can be activated or deactivated!
If the master flash unit is deactivated, it only
controls the slave units and does not contri-
bute to exposing the shot!
10.1.1 Remote master mode settings
• Switch on the flash unit with the
button.
The start screen appears.
TTL
• Press the sensor button of the displayed
mode of operation on the touch display as
0.6- 7.2 m
many times as it takes for the display for
selecting the mode of operation to appear.
M-
5,6
35 m
Zoom F
m
EV
• Press the
touch display and select
MODE
k O
STROBO
• Press the
REMOTE MASTER
the touch display.
REMOTE SLAVE
Remote master mode is set.
p
q
Remote master mode is shown in the picture.
REMOTE
OFF
Remote master mode is shown in the picture.
MASTER
The master does not make any contribution
I
A —
u
to exposure (REMOTE MASTER off).
I
B —
u
If the master is to contribute to exposure,
I
C —
then set the mode
u
(see 10.1.2).
I I
A B C
188
sensor buttons on the
REMOTE MASTER
.
REMOTE MASTER sensor button on
TTL or M on the master
10.1.2 Setting the flash mode on the master
flash unit
REMOTE OFF
MASTER
• Press the sensor button
I
A —
display as many times as it takes for the
u
I
B —
mode selection to appear.
u
I
C —
u
I I
A B C
MODE
O
• Press the sensor button on the touch
OFF
display for the desired mode of operation
TTL
(in the example
M
REMOTE TTL
The set mode of operation is adopted
MASTER
I immediately.
A —
u
I
B —
u
I
C —
u
I I
A B C
Off
on the touch
TTL .