Automatic P Ttl Fill-In Flash Mode - Metz mecablitz 52 AF-1 Pentax digital Mode D'emploi

Setting the mode of operation
• Switch on the flash unit with the
52AF-1
PEN
M
• Press the displayed mode of operation on
7,9 m
m
Z
F4.0
35
OOM
m
INFO 1/1
• Press the
P TTL
P TTL HSS
• Press on the selected mode of operation
k
P TTL
-7,9 m
0,7
• Set a suitable mode of operation on the
m
Z
F4.0
35
OOM
m
EV
INFO
• Tap the shutter release to transfer data bet-
148
button.The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last (e.g. M flash mode).
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
sensor buttons on the
touch display and select the desired mode
of operation.
that is highlighted in black. The setting is
adopted immediately.
camera, e.g. P, S, A etc.
ween the flash unit and the camera.
Set exposure correction
Exposure correction (EV) can be set in P TTL
flash mode
Setting the mode of operation
P TTL
• Press the
-7,9 m
0,7
display.
m
Z
F4.0
35
OOM
m
EV
INFO
• Press the
+ 2 / 3
touch display and set the desired exposure
+ 1
correction (e.g. +1).
+ 1 1 / 3
• Press the sensor button for the desired
exposure correction value
The setting is adopted immediately.

6.2 Automatic P TTL Fill-in flash mode

The automatic P TTL fill-in flash mode is acti-
vated by most cameras when the automatic
programme P is selected and by Vari or sub-
ject programmes during daylight (see camera
operating manual).
Fill-in flash mode overcomes troublesome
shadows and produces a more balanced
exposure between subject and background
with contre-jour shots.
The camera's computer-controlled metering
system sets the most suitable combination of
shutter speed, aperture and flash output.
P TTL
.
EV
sensor button on the touch
sensor buttons on the
+1
.