11.3 Modelling light (MOD. LIGHT)
The modelling light is a high-frequency
stroboscopic flash. It creates the impression
of a semi-permanent light for a duration of
about 3 seconds. The modelling light
enables the user to assess light distribution
and the formation of shadows before taking
pictures.
The modelling light is triggered with the
manual firing button
OPTION
Setting procedure
• Press the
for the selection menu to appear.
OPTION
O
• Press the
touch display.
RAPID
SUB-REFL.
• Press the
touch display and select
p
q
• Press the
k
touch display.
OPTION
O
STANDBY
• Press the
MOD. LIGHT
the touch display and switch the modelling
BEEP
light on or off. The setting is adopted
immediately.
p
q
After activation of the modelling light, „
" appears in the INFO menu.
MOD. LIGHT O
OFF
ON
198
.
button as often as it takes
OPTION
sensor button on the
sensor button on the
MOD. LIGHT
.
MOD. LIGHT
sensor button on the
ON
or
OFF
sensor button on
11.4 Zoom Mode (ZOOM MODE)
11.4.1 Extended Zoom Mode
In extended zoom mode the zoom position
of the reflector is reduced to one level below
the focal length of the camera lens.
The resulting expanded and broader light
coverage provides additional dispersed light
(reflections) inside rooms so that a softer
flash illumination is possible.
Example:
The focal length of the camera lens is 50 mm.
The extended zoom mode sets a 35 mm
reflector position on the flash unit. However,
50 mm continues to be shown on the display.
Setting procedure
• Press the
OPTION
for the selection menu to appear.
OPTION
O
• Press the
touch display.
ZOOMM SIZE
ZOOM MODE
• Press the
touch display and select
STANDBY
• Press the
p
q
takes for the selection menu to appear.
• Press the
ZOOMMODE O
touch display.
The setting is adopted immediately.
Extended
After activation of extended zoom mode,
Standard
"EXT" appears in the INFO menu.
Spot
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
ZOOM MODE
.
ZOOM MODE
button as often as it
EXTENDED
sensor button on the