Safety Instructions; Information On Assembly; Exploded Diagram - Sportplus POWER GYM SP-TG-001 Mode D'emploi

Masquer les pouces Voir aussi pour POWER GYM SP-TG-001:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.

SAFETY INSTRUCTIONS

CAUTION - PRODUCT DAMAGE
Do not alter the product in any way and use only original replacement parts.
Have all repairs carried out in a professional workshop or from similarly qualified
persons - improper repairs can lead to serious risks for the user. Use the product
exclusively for the intended purpose as described in this user manual.
Shield the product from spraying water, moisture, high temperatures and direct
sunlight.

INFORMATION ON ASSEMBLY

The product should be carefully assembled by a responsible adult. Ask for the
assistance of another, technically-skilled person in case of doubt.
Before beginning assembly of the product, read all assembly steps carefully
and review the diagram.
Remove all packaging materials and place all individual components on a free
surface. This will give you a good overview and simplify assembly. Shield the
assembly surface from filth and scratching by laying down suitable padding.
Check the components against the components list to make sure all are present.
Do not dispose of all packaging materials until assembly is completed.
Please note that there is always a risk of injury when using tools to carry out
manual tasks. Therefore, please exercise caution when assembling this product.
Make sure your work environment is hazard-free. For example, do not leave
any tools lying around. Place the packaging materials somewhere where they
will not pose any hazards during assembly. Packaging foil or plastic bags pose
a suffocation hazard for children!
After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
Since the product is made of metal, protective padding beneath the product is
necessary to protect the floor from damages/scratching. The padding should be
flat and not too thick to guarantee the product is stable.
SP-TG-001-IM-INT-06.indb 27
26

3. EXPLODED DIAGRAM

27
17/6/2016 5:41 PM

Publicité

Table des Matières
loading

Table des Matières