Computer; Functions; Inserting The Battery - Sportplus SP-MSP-001 Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.

COMPUTER

FUNCTIONS

Press the MODE button on the computer to toggle between functions. Press and hold the
MODE button for 2 seconds to reset the computer to zero.
SCAN:
TIME:
COUNT:
REPS/MIN:
CALS:

INSERTING THE BATTERY

• Remove the computer from the main frame and remove the battery from the back.
• Insert one LR44 AG13 battery. Heed correct polarity.
• Verify that all cable connections are secure. Reinsert the computer into the main
frame.
Under normal operating conditions, the battery's service life is one year.
A battery replacement is necessary as soon as the display starts to fade or is completely
faded. Wait 15 seconds before reinserting the battery.
NOTE: All saved data is lost when you replace the battery. If the stepping height is set
too low, the computer may not count correctly. Tighten the set knob (7) to increase the
stepping height.
Press the MODE button to select SCAN. With SCAN activated,
the computer automatically toggles between the functions shown
in the lower monitor row.
Shows the time elapsed from the start of training.
Shows the number of steps from the start of training.
Shows the average number of steps from the start of training.
Shows your calorie consumption from the start of training
(approximate value).
24

Publicité

Table des Matières
loading

Table des Matières