Improper Use; Personnel Qualifications - Aventics CL03 Notice D'instruction

AVENTICS | CL03, CL03-XL | R402000141–BAL–001–AF
Only use the Valve system within the performance range
provided in the technical data.
The Valve system is only intended for industrial
applications.
Intended use includes having read and understood these
instructions, especially the chapter "For Your Safety".
2.2

Improper use

It is considered improper use when the Valve system
is used for any application not stated in these instructions
or is used under operating conditions that deviate from
those described in these instructions.
2.3

Personnel qualifications

Assembly, disassembly, commissioning, and operation require
basic electrical and pneumatic knowledge, as well
as knowledge of the appropriate technical terms. Assembly,
disassembly, connection, commissioning, and operation may
therefore only be carried out by qualified electrical
or pneumatic personnel or an instructed person under
the direction and supervision of qualified personnel..
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures,
due to their professional training, knowledge, and experience,
as well as their understanding of the relevant regulations
pertaining to the work to be done. Qualified personnel must
observe the rules relevant to the subject area.
57
For Your Safety