Improper Use; Personnel Qualifications - Aventics DDL Mode D'emploi

AVENTICS | DDL, CL03/CL03-XL | R402003658–BDL–001–AE
2.3

Improper use

Any use other than that described under Intended use is
improper and is not permitted.
If unsuitable products are installed or used in safety-relevant
applications, this may result in unintended system operating
states that could lead to injuries and/or equipment damage.
Therefore, only use a product in safety-relevant applications if
such use is specifically stated and permitted in the product
documentation.
AVENTICS GmbH is not liable for any damages resulting from
improper use. The user alone bears the risks of improper use of
the product.
It is considered improper use when the bus coupler
W
is used for any application not stated in these instructions,
W
is used under operating conditions that deviate from those
described in these instructions, or
W
is changed or converted.
2.4

Personnel qualifications

Assembly, disassembly, commissioning and operation require
fundamental electrical and pneumatic knowledge, as well as
knowledge of the applicable technical terminology. For this
reason, the device may only be assembled, disassembled,
commissioned and operated by qualified electrical and
pneumatic personnel, or by a person under the control and
supervision of such qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures due to
their professional training, knowledge, and experience, as well
as their understanding of the relevant conditions pertaining to
the work to be done. Qualified personnel must observe the rules
relevant to the subject area.
55
For your safety