BORETTI CFBI9015IX Prescriptions De Montage Et Mode D'emploi page 255

After cleaning, replace the inner glass pane
When replacing the inner glass pane, make sure that:
* you replace the pane correctly, as shown. The pane must be in the position
described below in order to fit into the door and to ensure that the appliance
operates safely and correctly.
* you take extra care not to bump the edges of the glass against any object or
surface.
* you do not force the pane into place. If you are experiencing difficulties
replacing the pane, remove it and start the process again from the
beginning. If this still does not help, call Customer Care.
* check that you are holding the pane the correct way. You should be able to
read the wording on it as it faces you.
* Check that the gasket "A" is in place (fig. 6.18). If not, correctly place the
gasket in the top edge of the inner glass (in the centre).
1. Insert the inner glass pane in the uppermost pair of grooves and push it
slightly (arrow 1 in figure 6.18).
2. Gently lower into place (arrow 2 in figure 6.18).
Fig. 6.18
2
1
255
A