BORETTI CFBI9015IX Prescriptions De Montage Et Mode D'emploi page 256

Replace the glass retainer
1. Position the glass retainer, as shown in the figure 6.19. It should sit on
the bottom edge of the outer glass. Check that the clamps "M" are not
deformed or damaged.
2. Gently push the glass retainer back into place. You should be able to hear
the tabs on both sides click as they lock the glass retainer in.
Important!
Make sure the glass retainer is correctly and firmly in place and that
the glass pane is secure.
2
Click
M
1
M
Fig. 6.19
1
M
2
Click
256