BORETTI CFBI9015IX Prescriptions De Montage Et Mode D'emploi page 227

Error codes on the cooking zones display
Error code
Erxx
or Ex
(not E2 or EH)
or
display
not operative
E2
or
EH
E6
or
display
not operative
Symbol
as per
side
figure
Example
1.
2.
3.
4.
5.
E and 2 alternating for one or more cooking
zones. This indicates an overheating of the
cooking zone/s.
1.
2.
The cooker has been incorrectly
connected. The appliance shall be
connected to the appropriate power
supply by a qualified technician.
This indicates an incorrect operation of
one or more cooking zone control knob.
1.
2.
3.
4.
5.
227
What to do
Switch off the cooker and
disconnect it from the mains.
Wait for about 1 minute, then
reconnect the cooker and turn
on the cooking zones.
Wait for about 1 minute and if the
error message does not appear
again the cooking zones can be
used.
If the error message does not
disappear repeat step from 1 to 3.
If the problem continues do not
use the induction hob (only use the
oven) and contact your Authorised
Service Centre.
Switch off the cooking zone/s and
leave to cool.
If the problem continues do not
use the induction hob (only use the
oven) and contact your Authorised
Service Centre.
Turn the cooking zone control knobs
to the "0" (Off) position, then switch
off the cooker and disconnect it
from the mains.
Wait for about 1 minute, then
reconnect the cooker and turn
on the cooking zones.
Wait for about 1 minute and if the
error message does not appear
again the cooking zones can be
used.
If the error message does not
disappear repeat step from 1 to 3.
If the problem continues do not
use the induction hob (only use the
oven) and contact your Authorised
Service Centre.