BORETTI CFBI9015IX Prescriptions De Montage Et Mode D'emploi page 240

Fig. 5.1
Electronic clock (fig. 5.2)
The programmer is equipped with an electronic clock with illuminated
numbers which indicates hours and minutes. Upon immediate connection
of the oven or after a power cut, three zeros will flash on the programmer
display.
To set the correct time of day it is necessary to push the
then the  or ➖ button until you have set the correct time (fig. 5.2).
In another way push simultaneously the
same time push the  or ➖ button.
Note
If the clock is reset it deletes any previously set programs.
Normal cooking without the use of
the programmer
To manually use the oven, without the
aid of the programmer, it is necessary
to cancel the flashing AUTO by
pushing the button (AUTO will be
switched off and the symbol
illuminate - fig. 5.3).
Attention
If the AUTO is illuminated (which means a cooking program has
already been inserted), by pushing the button
program and return to manual operation.
If the oven is switched on, you must switch off manually.
Fig. 5.2
two buttons and at the
will
Fig. 5.3
you cancel the
240
button and