BORETTI CFBI9015IX Prescriptions De Montage Et Mode D'emploi page 241

Electronic timer
The timer program consists only
of a buzzer which may be set for a
maximum period of 23 hours and
59 minutes.
If the AUTO symbol is flashing push
the button.
To set the time, push the
and the  or ➖ until you obtain the
desired time in the display (fig. 5.4).
Having finished the setting, the clock hour will appear on the panel and the
symbol will be illuminated.
The countdown will start immediately and may be seen at any moment on the
panel by simply pressing the button
At the end of the time, the
and continue for approximatley 7 minutes or until a button is pressed (not the
 /➖ buttons). After a short time the display will revert back to the time of day.
Setting the frequency of the audible signal
The buzzer has 3 different tones and can be changed by pressing the ➖
button, but only when the time of day is displayed
Automatic oven cooking
To cook food automatically in the oven, it is necessary to:
1. Set the length of the cooking period.
2. Set the end of the cooking time.
3. Set the temperature and the oven cooking program.
These operations are done in the
following way:
1. Set the length of the cooking
period by pushing the
and the  button to increase, or
➖ to decrease if you have passed
the desired time (fig. 5.5). The
AUTO and the
illuminate.
button
Fig. 5.4
.
symbol will disappear and the buzzer will sound
button
symbol will
Fig. 5.5
241