Manufacturer's Warranty; Spare Parts Lists - Roller Uni-Press SE Notice D'utilisation

Masquer les pouces Voir aussi pour Uni-Press SE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
eng
5.8. Fault: Expander does not complete the expanding, expanding head does not open fully.
Cause:
● Battery depleted or defective (ROLLER'S cordless drive units).
● Drive unit defective.
● Wrong expanding head (press fi tting system, size) inserted.
● Expanding head stiff or defective.
● Expander set incorrectly (ROLLER'S Akku-Exparo 22 V ACC).
● Distance from the press fi tting to the expanding head too small.
6. Disposal
The drive units, batteries and rapid chargers may not be thrown in the household
waste when they are fi nished with. They must be disposed of properly by law.
Lithium batteries and battery packs of all battery systems may only be disposed
of in the discharged state, all contacts of incompletely discharged lithium
batteries and battery packs must be covered with insulating tape.

7. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of the new product to the
fi rst user. The date of delivery shall be documented by the submission of the
original purchase documents, which must include the date of purchase and the
designation of the product. All functional defects occurring within the warranty
period, which are clearly the consequence of defects in production or materials,
will be remedied free of charge. The remedy of defects shall not extend or
renew the warranty period for the product. Damage attributable to natural wear
and tear, incorrect treatment or misuse, failure to observe the operational
instructions, unsuitable operating materials, excessive demand, use for unau-
thorized purposes, interventions by the customer or a third party or other
reasons, for which ROLLER is not responsible, shall be excluded from the
warranty.
Services under the warranty may only be provided by customer service stations
authorized for this purpose by ROLLER. Complaints will only be accepted if
the product is returned to a customer service station authorized by ROLLER
without prior interference in an unassembled condition. Replaced products and
parts shall become the property of ROLLER.
t be covered
t be covered with insulating tape.
Remedy:
● Charge the battery with the Li-Ion/Ni-Cd rapid charger or change the battery.
● Have the drive unit checked/repaired by an authorised ROLLER customer
service workshop.
● Change expanding head.
● Do not use the expanding head anymore! Clean the expanding head and
grease lightly with machine oil or change.
● Reset the expander, see 2.4.
● Increase the distance between the press fi tting and the expanding head.
The user shall be responsible for the cost of shipping and returning the product.
The legal rights of the user, in particular the right to make claims against the
seller under the warranty terms, shall not be affected. This manufacturer's
warranty only applies for new products which are purchased in the European
Union, in Norway or in Switzerland.
This warranty is subject to German law with the exclusion of the United Nations
Convention on Contracts for the International Sales of Goods (CISG).
8. Extension of the manufacturer's guarantee to 5 years
For the drive units listed in these operating instructions it is possible to extend
the guarantee time of the above manufacturer guarantee to 5 years by registering
the drive unit under www.albert-roller.de/service within 30 days of handover to
the fi rst user. Claims from the extension of the manufacturer guarantee can
only be made by the registered fi rst users on condition that the rating plate on
the drive unit is not removed or changed and the data are legible. Cession of
the claims is excluded.

9. Spare parts lists

For spare parts lists, see www.albert-roller.de → Downloads → Parts lists.
eng
21

Publicité

Table des Matières
loading

Table des Matières