3M ReLoad SRL Mode D'emploi page 39

Mode d'emploi • Instrucciones de usuario •
WARNING!
Never use a body belt for any fall arrest applications.
Always use a full body harness.
REW – 23, REC – 23, 30, 40, 50 and SREC 30, 50, 85, 130—connect the self locking snap hook on the end of
the lanyard to the designated fall arrest attachment point of a full body harness.
REW – 7, 12—the self locking snap hook can be attached to either the designated fall arrest attachment
point of a full body harness or the anchorage/anchorage connector.
REW-7-0241A - connect the rebar hook on the end of the lanyard to the anchorage/anchorage connector.
Always connect the body of the REW7-0241A to the fall arrest attachment point of a full body harness.
Figure 5—Only REW -7, 12 have the option to attach to the designated fall arrest attachment point or attachment
point on the full body harness. All other SRLs must connect to anchorage / anchorage connector
A. Anchorage/
Anchorage
Connector
B. SRL B. SRL
Connector Connector
A. Anchorage/ A. Anchorage/
Anchorage Anchorage
Connector Connector
B. SRL
Connector
39
User instructions
C. REW-7-0241A only
A. Anchorage/
Anchorage
Connector
B. SRL B. SRL
Connector Connector
A. Anchorage/
Anchorage
Connector