Intended Purpose - 3M ReLoad SRL Mode D'emploi

Mode d'emploi • Instrucciones de usuario •
1.0 Instructions for use
1.1 Applications

1.1.1 Intended purpose:

The Self Retracting Lanyard (SRL) is intended to be used as a connecting element within a personal fall
arrest system. The SRL must be used vertically in situations where user mobility is required and fall
protection is needed (inspection work, general construction and maintenance work etc.). A PFPE fall arrest
system comprises of a body support element or fall arrest full body harness), a connecting element (SRL or
energy absorbing lanyard), a connector (carabiner/hook) and an anchorage (lifeline/anchor).
WARNING!
This product is intended for overhead applications only. For applications below
shoulder height, please contact 3M Technical Service.
WARNING!
Ensure there is a rescue plan in place and you are aware of the procedure before
attempting any work at height.
WARNING!
Do not modify or alter the SRL. All maintenance work is to be conducted by a 3M
authorized person.
WARNING!
If this device has been issued for your personal use only, you must read and fully
understand this manual. Once you have read this manual, if you have any concerns
regarding the use of this device contact 3M. You must ensure this manual is fully
maintained and all inspections and recertifications of this device are recorded in the
logs found at the back of this manual.
NOTE: Authorized person means a person who is trained and approved by 3M to identify hazards or dangerous conditions
of the self retracting lanyard.
User instructions
15