socomec ATyS 6m Notice D'utilisation page 85

Voltage sensing and power supply kit
>
STEP 1: Network
No required in case of pre-set neutral on the
left kit from factory.
Power inputs (terminals 101-102 & 201-202) are 220/240
Vac ± 20%. It is necessary to adapt power input cables
connection according to network configuration (Power
• Standard kit:
Network 380 / 415 Vac ± 20 % with neutral
conductor (no kit modification required) :
Red wires
B A
mechanical cables
support
206 205 204 203 202201
SOCOMEC - Réf. : 532 211 F
Black wires
B A
101 102 103 104 105 106
Automatic Transfer Switch ATyS
Verify power supply on terminals 101-102 &
201-202: 230 Vac nominal ± 20 %.
supply to take between phase and phase or between
phase and neutral).
• Kit Modification:
For network 220 / 240 Vac ± 20 %, power supply
cables A-B to connect between phases
Red wires
B A
mechanical cables
support
206 205 204 203 202201
CONNECTIONS
Black wires
B A
101 102 103 104 105 106
85