Registration And Download; Information; Quick Registration, M-Center - Amanngirrbach ceramill mikro Mode D'emploi

R E G I S T R A T I O N A N D D O W N L O A D I N F O R M A T I O N
7 Registration and Download Information
7.1

Quick Registration, M-center

Before registering, it is advisable to note down the serial numbers of the various equipment/devices.
Machine
[1] Scanner (Ceramill Map)
[2] PC
[3] Mind/Match Dongle
[4] Ceramill milling
machines
Tab. 4
▷ To register, log on to
center.com
.
▷ On this page, click on the link "Register".
▷ Afterwards, fill out the form field with the per-
sonal data.
▷ Enter all serial numbers.
▷ Accept the terms of use.
▷ Click on the "Create account now" button.
A confirmation E-mail will be generated after a
short period and sent to the previously entered
E-mail address.
▷ Open the E-mail and click on the link in it.
This opens a Web page that confirms the regis-
tration.
If the link cannot be clicked on:
▷ Copy and paste the link into your Web
browser.
No. location
Rear side of the
unit
Top of PC
housing
Software box
Rear side of the
machine
www.ceramill-m-
Example
Your e-mail address and a password of your
choice are the access data for entering the pro-
tected area of the homepage
center.com (order tracking, video tutorials).
Within the next 24 hours you will receive another
E-mail. It contains the registration confirmation
and the FTP access data (6-digit) for uploading
data from our M-Center.
Two sets of access data are provided after
the registration. One for the M-Center
website (first E-mail) and one for the
upload of your data to our M-Center (sec-
ond E-mail).
▷ Enter all access data into the Ceramill
Mind design software (the window opens
automatically after clicking on the
Upload button
The registration process is now finished.
Serial number
www.ceramill-m-
).
E N
39