Order Tracking, M-Center; Download Information; Cleaning And Maintenance; Cleaning - Amanngirrbach ceramill mikro Mode D'emploi

C L E A N I N G A N D M A I N T E N A N C E
7.2

Order tracking, M-Center

After receiving the design data in the M-Center, an
E N
order confirmation will be sent via E-mail.
Additionally, you will be informed via E-mail when
your work goes into production and is dispatched.
A detailed list of all orders will be displayed on the
M-Center homepage in the login area under "My
orders". Here, each order will be allocated a track-
ing number after the order has been dispatched,
with which it can be monitored.
7.3

Download information

Further instructions (video tutorials) on operating
the Ceramill Map scanner and the Ceramill Mind
software are available on the Instructions DVD or
can be downloaded under
center.com
Software updates are also available on our web-
site under
40
www.ceramill-m-
.
www.ceramill-m-center.com
8

Cleaning and Maintenance

8.1

Cleaning

The Ceramill Mikro must be cleaned after each
working day.
NOTE:
Zirconia dust is abrasive!
▷ Clean the window in the door carefully, using
only a soft cloth; do not scrub or scour.
▷ Open the door of the Ceramill Mikro.
▷ Press operation button [A] on the Ceramill
Mikro.
The extraction system is activated.. The opera-
tion button lights up.
▷ Press service button [B] on the Ceramill Mikro.
The sealing air at the spindle is activated. The
service button lights up.
▷ Remove the collecting plate.
▷ Vacuum out the milling chamber.
▷ Briefly press service button [B].
The sealing air is deactivated.
▷ Briefly press operation button [A].
.
The extraction system is deactivated.