Warning And Safety Instructions - Amanngirrbach smartwax duo Mode De Fonctionnement

Technical Data:
D/W/H:
Length of the handpiece
cord:
Electrical specifications
of mains adaptor:
Output voltage:
Electrical power:
Temperature range:
Accessory / Consumables:
Order No.
116271 Mains adaptor 230V
116271V115 Mains adaptor 115 V
116280 Handpiece with cord
Modeling instruments (incl. handle):
116281 probe small
116282 probe large
116283 needle
116284 beaver tail
116285 knife
116286 spoon
116287 Waxjet
116289 Waxjet + handpiece with cord
Packing list:
Order No.
116270 Smartwax Duo, basic unit:
control unit
cotton role holder
handpiece with cord
probe small
user manual
130 x 150 x 50 mm
1,8 m
110 - 230V 50/60 Hz
6 V
12 W
50 - 220 °C
122 - 428 °F - switchable
! WARNING AND SAFETY
INSTRUCTIONS:
The Smartwax duo was especially developed to be
used in the dental field. For proper start-up and
operation, please follow the instructions for use.
The manufacturer does not assume liability for
damages resulting from applications others than
mentioned above or from improper handling.
Furthermore, the user is obliged to check on his
own whether the unit is suitable and practical for
the purposes intended or not - if these differ from
those mentioned in the instructions for use.
_ Clean the Smartwax duo with a solvent-
containing liquid!
_ Have the Smartwax duo repaired by an
authorized technician only.
_ Use only original accessory or spare parts.
_ Do not cover the mains adaptor during
operation!
_ The modeling tips reach temperatures up to
220 °C (428 °F). Therefore, do not touch the
modeling tips – burn hazard!
_ Removing the cork handle exposes the heating
element (9). Therefore, do not touch the heating
element – burn hazard!
_ Always store handpieces and modeling tips in
the according receptions at the control unit!
_ Do not heat the Smartwax duo handpiece
shank for some time without having inserted a
modeling instrument!
GB
9