Set The Time And Date; Factory Defaults - Manitowoc Indigo Série Manuel D'installation, D'utilisation Et D'entretien

Section 2

SET THE TIME AND DATE

When the ice machine is installed, the correct time and
date needs to be set for its location.
1. Press the Menu button.
2. Press the Down arrow until Set-Up is highlighted
[bracketed].
3. Press the Checkmark. The Set-Up menu will be
displayed and Language will be highlighted
[bracketed]. The default language is English.
4. Press the Checkmark. You can choose to view the
display in a language other than English, by
highlighting your choice and pressing the
Checkmark. Selecting one language will deselect
the others.
5. When the check reflects your preference, use the
Down arrow to navigate to Exit and press the
Checkmark. The display will return to the Set-Up
menu.
6. Use the Down arrow to highlight Time & Date.
7. Press the Checkmark. The date will appear on the
first line of the display (Mo/Day/Yr) and the time will
appear on the second line (24 Hour). The month will
have a blinking cursor.
0 7 2 4 1 0
1 4 : 0 8
E x i t
8. Using the Up or Down arrow, adjust the month, if
necessary.
9. When the correct month appears, use the Right
arrow to move the blinking cursor to day.
Part Number 000007345 2/14
10. Using the Up or Down arrow, adjust the day, if
necessary.
11. When the correct day appears, use the Right arrow
to move the blinking cursor to year.
12. Using the Up or Down arrow, adjust the year, if
necessary.
13. When the correct year appears, press the
Checkmark. Use the Right arrow to move the
blinking cursor to hour.
14. Using the Up or Down arrow, adjust the hour, if
necessary.
15. When the correct hour appears, use the Right button
to move the underline to minutes.
16. Using the Up or Down button, adjust the minutes, if
necessary.
17. When the correct minutes appear, press the
Checkmark twice.

FACTORY DEFAULTS

All other settings have been set to defaults by the
factory.
Time Configuration
LCD Brightness
Password On/Off
>
AuCS RunTime
Air Filter Minder
Water Filter Minder
LuminIce™ Minder
For more details and instructions for changing ice
machine settings, see "Set-Up Menu" in the Operation
section.
NOTE: Verify bridge thickness is correct by performing
an "Ice Thickness Check" as described on page 35.
Installation Instructions
Setting
Units
Ice Clarity
Clean Minder
Language
Default
Mo/Day/Yr / 24 Hour
Fahrenheit/Lbs/Gallons
Off
Level 2
Off
Off
Off
Off
Off
Off
English
23