Sibelmed Somnibel Pro Manuel D'utilisateur page 52

Somnibel is intended for use in the electromagnetic environment specified below. The costumer or the user of
Below mentioned tests are applicable to enclosure. Additionally, test EN-IEC 61000-4-2 is applicable to input/output signal and patient connections.
Immunity test
Electrostatic discharge (ESD)
EN-IEC 61000-4-2
Radiated RF
EN-IEC 61000-4-3
Proximity fields from RF
communications
EN-IEC 61000-4-3
Power frequency (50 / 60 Hz)
magnetic field
EN-IEC 61000-4-8
EN 25
Guidance and manufacturer's declaration – electromagnetic immunity
EN-IEC 60601 test level Compliance level
±8 kV contact ±8 kV contact
±2, ±4, ±8, ±15 kV, air ±2, ±4, ±8, ±15 kV, air
10 V/m 10 V/m
80 MHz to 2.7 GHz
80% AM at 1kHz
(View following table).
30 A/m 30 A/m
somnibel Pro
Somnibel should assure that it is used in such an environment.
Electromagnetic environment – guidance
Portable and mobile RF communications equipment should
be used no closer than 30cm to any part of
cables. The distance is calculated according to:
where P is the output power rating of the transmitter in watts
(W), d is the recommended separation in meters (m) and E is the
immunity level in V/m.
Only applicable to devices sensitive to magnetic fields.
User's Manual
Somnibel
including
534-80P-MUM_Rev.1.08