Esmach SPI 160 A hybrid Notice D'utilisation Et De Maintenance page 43

DESCRIPTION
AUTOMATIC WORKING
1
TROLLEY HOOKING/
UNHOOKING
2 HEAD UPSTROKE/
DOWNSTROKE
MANUAL WORKING AT
ST
3 1 SPEED
MANUAL WORKING AT
ND
4 2 SPEED
WORKING CYCLE START – MANUAL WORKING
If the electronic card fails, the machine can work in manual mode "HAND".
Cut off the electrical power supply to the machine in order to open the electric box. Move the
selector 1 to the MANUAL position. Close the electric box and give electrical power supply to the
machine by turning the master switch.
If the trolley is unhooked, put the selector 2 turned DOWN BELOW in position A and hook the
trolley by pressing at the same time the buttons on the two sides of the box (common button
and downstroke button). When the trolley is hooked, keep buttons pressed for 3 seconds to
guarantee the tightness.
To lower the head, put the selector 2 turned UP ABOVE in position B and hook the trolley by
pressing at the same time the buttons on the two sides of the box (common button and down-
stroke button). When the head is lowered, keep buttons pressed for 3 seconds to guarantee the
tightness.
Attention: before lowering the head, hook the trolley correctly.
To make the machine work at the 1
st
the 1 speed for an indeterminate time. If you want to make the machine work at the 2
press the emergency button near the box and press the button 4 2
To open the head, put the selector 2 turned UP ABOVE in position B and press at the same time
the buttons on the two sides of the box (common button and upstroke button). When the head
is up, to unhook the trolley, put the selector 2 turned DOWN BELOW in position A and press at
the same time the buttons on the two sides of the box (common button and upstroke button).
FUNCTION
When the selector is in position AUTO, the electronic card can
operate. When the selector is in MANUAL position, working is
possible in manual mode. Attention: the selector can be
moved to the right (MANUAL) only when the card fails.
When the selector is turned DOWN BELOW (fig. A), it hooks or
unhooks the trolley.
When the selector is turned UP ABOVE (fig. B), it lifts or lowers
the head.
Attention: before making the head lower, the trolley has to be
hooked correctly
When the selector 1 is in HAND position and the 1
button is pressed, the machine works at the 1
indeterminate time. If you want to change the speed, press
both the emergency button near the box and the speed button
you prefer.
Attention: make sure the trolley is hooked correctly and the
head is in work position.
When the selector 1 is in HAND position and the 2
button is pressed, the machine works at the 2
indeterminate time. If you want to change the speed, press
both the emergency button near the box and the speed button
you prefer.
st
speed, press the button 3 1
st
nd
st
SPEED. The machine works at
nd
SPEED.
English
st
SPEED
speed for an
nd
SPEED
speed for an
nd
speed,
43