Esmach SPI 160 A hybrid Notice D'utilisation Et De Maintenance page 29

RECIPES - LIST
It is possible to memory two kinds of recipes:
simple recipes: numbered from 1 to 9 in which
it is possible to recorder the dough times, the
bowl speed and in case the automatic up-
stroke
recipes with variations: from n° 10 to n° 99,
in addition to the functions described in
point a), the following can be programmed and
stored: addition of salt, improver, temperature
control and raising of the head at the end of the
cycle (only if the machine is provided
with the relevant optionals).
Figure n°26
-05- RECIPE N. 05
SELECT RECIPE
05:RECIPE N.05
06:RECIPE N.06
07:RECIPE N.07
08:RECIPE N.08
09:RECIPE N.09
10:RECIPE N.10
11:RECIPE N.11
12:RECIPE N.12
OK
ESC
▪ move in the proper box with F1/F2 keys
▪ select "yes" or "not" with key F3/F4 confirming than with ENTER.
▪ With "P01" and "P02" you can recall possible priority programs.
▪ To relate the program to the recipe see "list of parameter modifiable by the user"
RECIPES WORKING
Press twice STOP key.
Press the key PROG: the led is on.
The last selected recipe is shown (figure n°
27).
The names of the recipes are shown by pressing
the key PROG. With the keys F4-F3 you can se-
lect a new recipe.
Confirm by pressing the key F2.
Exit from the list of the recipes by using the key
F1. You go back to the previous recipe if you do
not confirm by pressing the key F2.
Start the work cycle by pressing the key START.
To recorder the automatic up-stroke at the end
of cycle in the simple recipes you must:
▪ push ENTER key
▪ digit the programming access code
confirming it with ENTER key.
-11 -
RECIPE
PHASE NUMBER:04 TOTAL TIME : 05.30
NAME
MAX TEMP.
TEMP. CONTROL
INSERT THE CODE : 255
Figure n°27
TAB
Figura n°25
RECIPE N. 11
PHASES
:RECIPE N.11
°C :25.2
:No
EDIT
English
"250"
29