Brakes - Ducati MONSTER 620 Manuel D'utilisation Et Entretien

Brakes

Front (620/620 DARK)
Type:
steel drilled disc.
no. 2 discs
Disc diameter:
300 mm
Hydraulically operated by a control lever on right
E
handlebar.
Braking surface, sq. cm:
44 per disc
Brake callipers with separate pistons.
Make and type:
BREMBO PF2x28 2 Pistons.
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 15.
Front (620 DARK MONODISCO)
Type:
steel drilled single disc.
Disc diameter:
320 mm
Hydraulically operated by a control lever on right
handlebar.
Braking surface, sq. cm:
44 per disc
Brake callipers with separate pistons.
64
Make and type:
P 30/34 4 pistons.
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 13.
Rear
Type:
With fixed drilled steel disc.
Disc diameter:
245 mm
Hydraulically operated by a pedal on RH side.
Braking surface:
25 sq. cm
Brake calliper:
Ø cylinder 32 mm.
Make and type:
P 32 F
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 11.
Warning
Brake fluid can dissolve paintwork and can cause
severe eye and skin injuries in the event of accidental
spilling. Wash the affected area with abundant running
water.