Vibration Level - Evolution RAGE 5 Traduction Du Manuel D'origine

SPECIFICATIONS
MACHINE
Motor UK/EU: 230-240V ~ 50Hz (S6 40%)
Motor UK: 110V ~ 50Hz
Table Dimensions
Speed (No Load)
CUTTING CAPACITIES
Mild Steel Plate – Max Thickness
Wood - Maximum Depth Of Cut At 90 0
Wood - Maximum Depth Of Cut At 45 0
Weight
Riving Knife Thickness
BLADE
Diameter
Bore
Kerf
Teeth
Max Speed
NOISE & VIBRATION DATA
Sound Pressure L A
P
Sound Power Level L A
W
Uncertainty K
4
www.evolutionpowertools.com
METRIC IMPERIAL
1800W 8A
1600W 15A
656 x 1260mm 26 x 49-5/8"
2500min -1 2500rpm
6mm 1/4"
80mm 3-1/8˝
55mm 2-1/8˝
38kg 84lb
1.8mm .070˝
255mm 10˝
25.4mm 1˝
2mm .078˝
28 28
2750min -1 2750rpm
230-240V - 91.9dB(A)
110V - 90.2dB(A)
230-240V - 104.5dB(A)
110V - 104.2dB(A)
3dB(A)
www.evolutionpowertools.com
LABELS & SYMBOLS
Symbol Description
V
Volts
A
Amperes
Hz Hertz
Min -1 Speed
~ Alternating current
n o No load speed
Wear safety goggles
Wear ear protection
Do not touch
Wear dust protection
Read Instructions
Warning
CE certification
Waste electrical and
electronic equipment
LABELS & SYMBOLS
WARNING:
Do not operate the saw if any
warning and/or instruction labels are missing
or damaged. Contact evolution power tools for
replacement labels.
Only use genuine Evolution replacement
blades. Unauthorized blades may be
dangerous! Keep the blades securely fastened.
Check for debris before installing any new
blades and do not use dull or broken blades.
Check the blades regularly for condition
and wear. Damaged or worn blades should
be replaced immediately. Loose fitting
or damaged guards must be replaced
immediately. Beware of ejecting chips as they
may be HOT. Always make provisions for safe
handling of excess material.

VIBRATION LEVEL

The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
WARNING
: The vibration emission during
actual use of the power tool can differ from the
declared total value depending on the ways
in which the tool is used. The need to identify
safety measures and to protect the operator
are based on an estimation of exposure in the
actual conditions of use (taking account of all
parts of the operating cycle, such as the times
the tool is switched off, when it is running idle,
in addition to trigger time).
To obtain an additional copy of your manual,
please contact Evolution Power Tools at:
UK: 0870 609 2297
USA: 1-866-EVO-TOOL
WEB: www.evolutionpowertools.com
5
EN
DE
ES
FR
IT
NL