Interrupting The Short Time Clock; Setting Up Several Short Time Clocks; Switching Off A Short-Time Clock When Several Short Time Clocks Have Been Started - Salvis ProfiLine GN 2/1 Mode D'emploi

Masquer les pouces Voir aussi pour ProfiLine GN 2/1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en
5.5.3

Interrupting the short time clock

● The indicator light in the key "START/STOP"
● The indicator light of the active short time clock flashes.
. Press the "START/STOP"
● The indicator light in the key "START/STOP"
● The indicator light of the active short time clock illuminates.
5.5.4

Setting up several short time clocks

This function can be used, e.g. to set an intermediate time when, e.g. the food to be cooked must be
stirred.
Up to four short time clocks can be used simultaneously.
. Press the desired, for example key "1, 2, 3 or 4", and "START/STOP"
-
. Repeat this procedure for each key that should be used, , until all times required are set and
started.
● The next shortest remaining time is shown on the display, regardless of which key was pressed
first.
● The indicator lights of the keys selected illuminate.
● The control light in the key with the shortest remaining time flashes.
● All activated short time clocks are separately counted down.
● After expiry of the time, an acoustic signal is output.
-
. Tointerrupt the acoustic signal, press the key with the flashing indicator light.
● The indicator light in the key goes out.
● The next shortest remaining time is shown on the display and the indicator light in the key
flashes.
● These procedure are repeated until all selected times have expired.
Displaying short time clocks
If multiple short time clocks are started, the running times can be indicated for each individual key.
. Press the desired key, e.g. "1, 2, 3 or 4".
● The time is displayed for approx 3 second.
5.5.5
Switching off a short-time clock when several short time clocks have been
started
Example: The indicator light in the key "1" flashes and the indicator light in the keys "3" and "4" are
illuminated. The short time clock on key "3" is to be switched off.
+
. Press key "3".
● The indicator light in key "3" flashes.
3 sec.
. Press the key "START/STOP"
● The indicator light in key "3" goes out. The short time clock has been switched off.
● The next shortest remaining time is shown on the display and the indicator light in the key
flashes.
36 / 76
illuminates.
key
goes off.
within 3 seconds.
key.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Profiline gn 3/1

Table des Matières