en
4.1
Control panel
Key "Actual temperature/tilting"
- Interrogate actual temperature
- Activating the arrow keys for the tilting procedure
The indicator light illuminates
when the arrow keys for the
tilting procedure are
activated.
The indicator light flashes
when a short time clock
selection is started.
The indicator light flashes
when a start time selection is
started.
"Start/stop" key
- Starting or stopping the
short time clock,
- Start or stop the start time
selection (hold for 3
seconds)
- Changing the basic
settings for the short time
clock
"P" key in combination with other
keys
- Temperature selection (keys 1, 2, 3
and 4)
- Changing the stored temperature
- Indication of hours until maintenance
- Setting of parameters
5.
Commissioning
. Before using the appliance for the first time, clean with a cleaning product that dissolves grease.
● Cleaning, refer to page 43, Chapter 7.
32 / 76
Display
- Time in hours and minutes
- Minutes and seconds
- Parameter number
"1, 2, 3 and 4" keys - time/temperature
- Selection of the short time clock
- Interrupting the acoustic signal
- Selecting the temperature
The indicator lights in the keys
- are illuminated when the short time clock is
- flash when the short time clock has expired
WARNING! Scalding hazard!
Spraying hot edible oil or fat!
● Do not add water to heated edible oil or fat!
Sudden rising hot vapour!
● Proceed with the appropriate caution when adding water to the heated frying sur
face!
switched on,
Display
- Setpoint or actual temperature.
- Notice maintenance H20
- Parameter values
- Error number
Arrow keys
"Up" key
"Down" key
In increments of 1 or
5, depending on the
setting in chapter 5.10
Pivoting the bratt pan
Dot is illuminated
when heating is on,
dot flashes
during heating up
procedure.
"On/off" key
- For switching on/off,
hold it down for
3 seconds.