Indications For Use - Covidien Edge E1450G Mode D'emploi

en
Edge™

E1450G Blade Electrode
3" (7.62 cm)

E1450X Hex-locking Blade
Electrode
2.5" (6.35 cm)

E1450-4 Blade Electrode
4" (10.16 cm)

E1450-6 Blade Electrode
6.5" (16.51 cm)

E1475X Hex-locking Blade
Electrode
2.75" (7.0 cm)
For use with a max peak voltage of 5600 V.
Not made with natural rubber latex
2
Do not use if package is opened or
damaged

Indications for Use

The Edge Coated Electrodes are intended
as an alternative to uncoated stainless
steel electrodes for use in conventional
monopolar electrosurgical accessories.
The coated electrodes are intended for use in
situations where monopolar electrosurgical
cutting and coagulation are normally used.
Warning
This product cannot be adequately cleaned
and/or sterilized by the user in order
to facilitate safe reuse, and is therefore
intended for single use. Attempts to clean or
sterilize these devices may result in a bio-
incompatibility, infection, or product failure
risks to the patient.
Explosion Hazard Do not use
electrosurgery in the presence of flammable
anesthetics.