Technical Specifications - Güde GDS 16 PRO Traduction Du Mode D'emploi D'origine

LED lamp operation
Switch the appliance on (pic. E/14) as specified under
•
Switching on/off.
The LED lamp (pic. A/9) can now be turned on/off
•
using the switch (pic. E/17).
Laser operation
Switch the appliance on (pic. E/14) as specified under
•
Switching on/off.
Laser (pic. H/24) can now be turned on/off using the
•
switch (pic. E/16).
Release the saw blade cover (pic. A/2). Fold the saw
•
blade cover backwards.
Use the laser adjusting screw (pic. H/23) to adjust the
•
laser line projected on the workpiece. For that
purpose, loosen the laser adjusting screw (pic. H/23)
and adjust the laser (pic. H/24) accordingly. Retighten
the laser adjusting screw (pic. H/23).
Caution: Laser line to be adjusted using the laser
adjusting screw (pic. H/23) only, not using the laser!
Risk of injury by the moving saw blade,
Blowing equipment/exhaust – pic. F
Adjust the blowing equipment hose in a way it
•
constantly blows the cutting area.
In addition, a vacuum can be connected to the dust
•
extractor adapter.
Fitting the saw blades – pic. F
Unnecessary saw blades can be stored in the saw blade
storing area (pic. F/8). Open and close the saw blade
storing area as shown in picture F.
Marking
Product safety:
Product corresponds to
applicable EU standards
Prohibitions:
No pulling the plug!
No touching inside
Warning:
Warning/Caution
Warning against hand injury
Protect against rain and
moisture!
Warning against dangerous
voltage
Warning against laser
beam
Commands:
Read carefully the Operating
Instructions. Learn carefully
how the appliance is used
before using it.
Pull the plug out before
opening.
Environment protection:
Dispose waste professionally
so as not harm the
environment.
Any defective and/or disposed
electric or electronic devices
must be delivered to
respective collection centres.
Package:
Protect against moisture
Interseroh-Recycling

Technical specifications:

Connection
Engine output
Revolutions:
Saw blade dimensions
Other:
Laser function
13
Wear headphones and
protective glasses
Packing cardboard material
may be delivered to
collecting centres for
recycling.
This side up
Weight
Cutting power 90°:
Cutting power 45°:
Noise: