How To Read The Manual; Getting To Know The Machine - Stiga SHT 660 K Manuel D'utilisation

IMPORTANT - READ CAREFULLY BEFORE USING THE MACHINE.
EN
Keep for future reference
TABLE OF CONTENTS

Getting to know the machine ......................... 5

Safety regulations .......................................... 6
Operating instructions .................................... 8
1. Preparing to work ..................................... 8
2. Use of the machine .................................. 9
3. Cutting and adjusting hedges ................ 11
4. Routine maintenance ............................. 11
5. Extraordinary maintenance ................... 12
6. Diagnostics ............................................ 13

HOW TO READ THE MANUAL

Certain paragraphs in the manual contain par-
ticularly significant information and are marked
with various levels of highlighting with the follow-
ing meaning:
NOTE or
IMPORTANT These give details or further infor­
mation on what has been previously indicated
and aim to prevent damage to the machine or
cause other damage.
WARNING! Non­observance will result in
the risk of injury to oneself or others.
DANGER! Non­observance will result in
the risk of serious injury or death to oneself
or others.
GETTING TO KNOW THE MACHINE
NOTE - The images corresponding to the ref-
erences are found on page 2 of this manual.
DESCRIPTION OF THE MACHINE
AND ITS RANGE OF USE
This machine is a garden tool, and precisely a
portable hedge trimmer with petrol engine for
home use.
The machine is basically composed of a power
unit and a pair of serrated blades that are driv-
en by a mechanism that provides an alternating
straight movement.
The safety systems impede accidental move-
ments of the blades while the operator is absent.
Intended use
This machine was designed and manufactured
for cutting and adjusting hedges that consist of
bushes with small branches that are in propor-
tion to the machine's characteristics.
Improper use
Any other use differing from the above men-
tioned ones could be hazardous and harm peo-
ple and/or damage things. Examples of improper
use may include, but are not limited to:
- cutting grass in general and in particular close
to curbs;
- s hredding of materials for composting;
- p runing;
- u se of the machine for cutting non-plant ma-
terial;
- u se of the machine by more than one person.
Improper use of the machine will invalidate the
warranty, relieve the manufacturer from all liabil-
ities, and the user will consequently be liable for
all and any damage or injury to himself or others.
IDENTIFICATION LABEL
AND MACHINE COMPONENTS
1. Engine
2. Cutting device (blade)
3. Cutter protection plate
4. Front handgrip
5. Rear handgrip
6. Rear handgrip release control
7. Fuel mixture tank cap
8. Starter grip
9. Spark plug housing
10. Blade protection
11. Engine stop switch
12. Blade control (Throttle trigger)
13. Throttle safety lever
14. Choke
15. Primer
21. Conformity marking
22. Name and address of the manufacturer
23. Sound power level guaranteed
24. Manufacturer's reference model
25. Machine model (if indicated)
26. Serial number
27. Certification institute trade mark (if indi-
cated)
5