How To Read The Manual; General Safety Warnings - Stiga TR 48 LI Mode D'emploi

WARNING: READ THOROUGHLY THE INSTRUCTION BOOKLET
EN
BEFORE USING THE MACHINE. Keep for future reference.
TABLE OF CONTENTS

1. HOW TO READ THE MANUAL ..................... 1

2. GENERAL SAFETY WARNINGS ................. 1

3. SYMBOLS ................................................... 4
4. DESCRIPTION ............................................. 5
5. ASSEMBLY ................................................... 5
6. OPERATION ................................................. 5
7. TROUBLESHOOTING .................................. 8
1. HOW TO READ THE MANUAL
Some paragraphs in the manual contain important
information regarding safety and operation and
are emphasized in this manne:
The symbol
compliance with the warning could lead to
personal and/or third party injury and or damage.
2. GENERAL SAFETY WARNINGS
• Wear protective glasses or goggles;
• Never allow children or people unfamiliar
with the instructions to use the machine;
• Stop using the machine while people,
especially children, or pets are nearby;
• Only use the machine in daylight
or good artificial light;
• Before using the machine and after
any impact, check for signs of wear or
damage and repair as necessary;
• Never operate the machine with damaged
guards or without the guards in place;
• Keep hands and feet away from the
cutting means at all times and especially
when switching on the motor;
• Take care against injury from any device
fitted for trimming the filament line
length. After extending new cutter line
always return the machine to its normal
operating position before switching on;
• Never fit metal cutting elements;
• Never use replacement parts
or accessories not provided or
recommended by the manufacturer;
• Disconnect the machine from the mains
before checking, cleaning or working on
the machine and when it is not in use;
• Always ensure that ventilation
openings are kept clear of debris;
• Where symbols/pictograms are used
in the marking on the machine their
function shall be explained;
• An indication of the mass of the
machine in kilogrammes.
Your trimmer has been engineered and
manufactured to Greenworks tools's high
standard for dependability, ease of operation,
and operator safety. When properly cared for, it
will give you years of trouble-free performance.
EN - 1
highlights danger. Non-