Identification And Servicing; Technical Specifications - Grillo G110 Manuel D'entretien

AFTER-SALES SERVICE
This handbook provides instructions for use of the cultivator and for correct basic servicing which
the user can carry out himself. For all procedures not described in this handbook, contact your
local dealer.
SPARE PARTS
Always use original spare parts, as they are the only ones to offer complete safety and
interchangeability. Always state the serial number when ordering. For engine parts, refer to the
specific handbook.
WARRANTY
The guarantee is given in compliance with the current law. The dealer will have to give the client a
copy of the registration card of the machine, which they will print up from the Grillo website.
the engine the guarantee of the relative manufacturers apply.
ORDERING SPARE PARTS
Always state the machine serial number and the code number of the part to be replaced. Contact
your local dealer. Our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC) - ITALY
Tel. 0039 / 0547 / 633111 - Fax 0039 / 0547 / 632011
Web site: www.grillospa.it - E-mail: grillo@grillospa.it
ENGINE
KOHLER 15KD440, 441cc, 11HP @ 3600 r.p.m., one-cylinder diesel (electric starter)
HONDA GX390, 389cc, 11,7HP @ 3600 r.p.m.., one-cylinder petrol
MACHINE:
Clutch: active clutch.
Gearbox: 6 speeds – 3 forward + 3 reverse both as rotavator and as sickle-bar (turning the
handlebars).
Speeds in km/h with engine at 3600 r.p.m. are as follows:
Ist REVERSE
IInd REVERSE
IIIrd REVERSE
P.T.O.: independent from the gearbox, 965 rpm with engine at 3600 rpm.
Wheels: 4.00-10, 5.00-10 (5.00-12 only with furrower and plough). Garden wheels 20×10.00-8
Rotary tiller: 68 cm standard and adjustable up to 33-47-58-68 cm.
Translation of the Original Instructions

IDENTIFICATION AND SERVICING

TECHNICAL SPECIFICATIONS G110
Gears
Ist
IInd
IIIrd
IDENTIFICATION
The vehicle's serial number is punched on the
nameplate on the left-hand longitudinal member
of the chassis and on the gearbox nameplate.
Always state the serial number when ordering
spare parts.
Speeds with tyres 5.00-10
8
1,3
2,4
5,0
0,7
1,5
3,2
For